International Journal Articles Published

33.

“Strengthening mechanisms analysis and tailoring of bimodal grain structures for enhanced strength in CoCrFeMnNi high entropy alloys”

Jaesoung Lee, Seulgi Kim(Equally Contributed), Taehyun Kwon, Young Il Kim, Suyeon Kim, Sung Ho Song*, Bin Lee*, Dongju Lee*,

Rare Metals, Accepted

32.

“Microstructure and residual stress analysis as heat treatment of additive manufactured A356.2 alloy by powder bed fusion”

Sang Cheol Park, InYeong Kim,(Equally Contributed), Kee-Ahn Lee, Seok-Jun Seo, Dae-Kyeom Kim*, Bin Lee*,

Materials Characterization, Volume 207, 113538, 2024.01

DOI: 10.1016/j.matchar.2023.113538

31.

“Porous Material (Titanium Gas Diffusion Layer) in Proton Exchange Membrane Fuel Cell/Electrolyzer : Fabrication Methods & GeoDict : A Critical Review”

Javid Hussain, Dae-Kyeom Kim, Sangmin Park, Muhammad Waqas Khalid, Sayed Sajid Hussain, Bin Lee, Myungsuk Song*, Taek-soo Kim*,

Materials, Volume 16, No 13, 4515, 2023.06

DOI: 10.3390/ma16134515

30.

“Residual stress analysis of additive manufactured A356.2 aluminum alloys using X-Ray diffraction methods”

SangCheol Park, InYeong Kim, Young Il Kim, Dae-Kyeom Kim, Soong Ju Oh, Kee-Ahn Lee, Bin Lee*,

Korean Journal of Metals and Materials, Volume 61, No 7, pp. 534-544, 2023.06

DOI: 10.3365/KJMM.2023.61.7.534

29.

“Experimental and computational study of optimized gas diffusion layer for polymer electrolyte membrane electrolyzer”

Javid Hussain, Dae-Keom Kim, Sangmin Park, Muhammad Waqas Khalid, Syed Sajid Hussain, Ammad Ali, Bin Lee, Myungsuk Song*, Taek-Soo Kim*,

Materials, Volume 16, No. 13, 4554, 2023.06

DOI: 10.3390/ma16134554

28.

“Microwave hybrid and conventional sintering of Al2O3 and Al2O3/ZrO2 multilayers fabricated by aqueous tape casting”

Muhammad Waqas Khalid, SangCheol Park, InYeong Kim, Javid Hussain, Amjad Hussain, Ammad Ali, Bum Sung Kim, Bin Lee*,

Journal of American Ceramic Society, Volume 106, Issue 12, pp. 7288-7302, 2023.12

DOI: 10.1111/jace.19249

27.

“Surface residual stress analysis of additive manufactured AlSi10Mg alloys”

Inyeong Kim, Sang Cheol Park, Young Il Kim, Dae-Kyeom Kim, Kee-Ahn Lee, Soong Ju Oh, Bin Lee*,

Journal of Alloys and Compounds, Volume 945, 169315, 2023.06

DOI: 10.1016/j.jallcom.2023.169315

26.

“Enhancing spreadability of hydrogenation-dehydrogenation titanium powder and novel method to characterize powder spreadability for powder bed fusion additive manufacturing”

Young Il Kim, Dae-Kyeom Kim, Inyeong Kim, Sang Cheol Park, Dongju Lee*, Bin Lee*,

Materials & Design, Volume 223, 111247, 2022.11

DOI: 10.1016/j.matdes.2022.111247

25.

“Highly thermoconductive copper-graphite flake composites controlled in the heat direction by electroless plating and spark plasma sintering”

Jaesoung Lee, Young Il Kim, Seulgi Kim, Bin Lee*, Dongju Lee*,

Journal of Alloys and Compounds, Volume 920, 165894, 2022.11

DOI: 10.1016/j.jallcom.2022.165894

24.

“Zone-specific temperature distribution, densification trajectory and grain-growth kinetics of microwave-hybrid-sintered and conventionally sintered Al2O3 slip casts”

Muhammad Waqas Khalid , Young Il Kim , Muhammad Aneeq Haq , In yeong Kim, Dongj u Lee, Bum Sung Kim, Bin Lee*,

Journal of Asian Ceramic Societies, Volume 10, 322, 2022.03

DOI: 10.1080/21870764.2022.2049997

23.

“Facile recycling of cemented tungsten carbide soft scrap via mechanochemical ball milling”

Jaesoung Lee, Mingoo Kim, Seulgi Kim, Yunhee Ahn, Bin Lee*, Dongju Lee*,

International Journal of Refractory Metals and Hard Materials, Volume 100, 105645, 2021.11

DOI: 10.1016/j.ijrmhm.2021.105645

22.

“Microstructure and mechanical properties of SKD61–Cu cooling channel fabricated via explosive welding”

Sang-Soo Shin*, Young-Il Kim, Ki-Hyuk Kim, Bin Lee*,

Materials Today Communications, Volume 28, 102645, 2021.09

DOI: 10.1016/j.mtcomm.2021.102645

21.

“Enhanced cooling channel efficiency of high-pressure die-casting molds with pure copper linings in cooling channels via explosive bonding”

Sang-Soo Shin, Sang-Kee Lee, Dae-Kyeom Kim, Bin Lee*,

Journal of Materials Processing Technology , Volume 297, 117235, 2021.11

DOI: 10.1016/j.jmatprotec.2021.117235

20.

“Densification behavior of microwave hybrid sintered Al2O3 bimodal powder mixtures and comparison with 3D modeling and simulation”

Muhammad Waqas Khalid , Young Il Kim , Muhammad Aneeq Haq , Sa ng-Soo Shin, Dongju Lee, Bum Sung Kim, Bin Lee*,

International Journal of Refractory Metals and Hard Materials , Volume 99, 105586, 2021.09

DOI: 10.1016/j.ijrmhm.2021.105586

19.

“The effects of Y pre-alloying on the in-situ dispersoids of ODS CoCrFeMnNi high-entropy alloy”

SeungHyeok Chung, Bin Lee, Soo Yeol Lee, Changwoo Do, Ho Jin Ryu*,

Journal of Materials Science & Technology, Volume 85, Pages 62-75, 2021.09

DOI: 10.1016/j.jmst.2020.11.081

18.

“Improving spreadability of hydrogenation–dehydrogenation Ti powder via surface treatment using silane-based compounds”

Young Il Kim+, Dae-Kyeom Kim+(Equally Contributed), Dongju Lee, Taek-Soo Kim, Young Do Kim, Bin Lee*,

Applied Surface Science, Volume 556, 149645, 2021.08

DOI: 10.1016/j.apsusc.2021.149645

17.

“Comparative study for microstructural characterisations and properties of Ti-Y powders produced by vacuum induction gas atomization cold crucible process”

Dae-Kyeom Kim+, Young Il Kim+(Equally Contributed), Young Do Kim, Dongju Lee, Bin Lee*, Taek-Soo Kim*,

Powder Metallurgy, Volumn 64, Pages 396-403, 1 2021.05

DOI: 10.1080/00325899.2021.1921962

16.

“Gas atomization parametric study on the VIGA-CC based synthesis of titanium powder”

Dae-kyeom Kim, Young Il Kim, Hwaseon Lee, Young Do Kim, Dongju Lee, Bin Lee*, Taek-soo Kim*,

Archives of Metallurgy and Materials, Vol. 65, No.3, pp.997-1000, 2020.07

DOI: 10.24425/amm.2020.133205

15.

“Boron Nitride Nanoplatelets as Reinforcement Material for Dental Ceramics”

Bin Lee*, Jae-Sung Kwon, Muhammad Waqas Khalid, Kwang-Mahn Kim, Joonhui Kim, Kyoung Mook Lim, Soon Hyung Hong*,

Dental Materials, Vol. 36, No. 6, pp.744-754, 2020.06

DOI: 10.1016/j.dental.2020.03.002

14.

“Highly porous cobalt oxide-decorated carbon nanofibers fabricated from starch as free-standing electrodes for supercapacitors”

Lemya Kebabsa, Joonhui Kim, Dongju Lee*, Bin Lee*,

Applied Surface Science, Vol. 511, 1, pp.145313, 2020.05

DOI: 10.1016/j.apsusc.2020.145313

13.

“Microwave hybrid sintering of Al2O3 and Al2O3-ZrO2 composites, and effects of ZrO2 crystal structure on mechanical properties, thermal properties, and sintering kinetics”

Muhammad Waqas Khalid, Young Il Kiim, Muhammad Aneeq Haq, Dongju Lee, Bum Sung Kim, Bin Lee*,

Ceramics International, Vol. 46, No. 7, pp.9002-9010, 2020.05

DOI: 10.1016/j.ceramint.2019.12.147

12.

“High entropy alloy strengthened by in situ formation of entropy-stabilized nano-dispersoids"

Bharat Gwalani, Rizaldy M. Pohan, Junho Lee, Bin Lee, Rajarshi Banerjee, Ho Jin Ryu*, Soon Hyung Hong*,

Scientific Reports, Vol. 8, pp. 14085, 2018.09

DOI: 10.1038/s41598-018-32552-6

11.

“Multistep heat-treatment effects on electrospun Nd-Fe-B-O nanofabers”

E.J.Jeon, Y.-H.Choa, J.Lee, B.Lee, H.M.Cho, J.On, B.S.Kim*,

Archives of Metallurgy and Materials, Vol. 63, No.3, pp.1431-1435, 2018.

DOI: 10.24425/123823

10.

“Microstructure development of spark plasma sintered Ti-Nb alloy by heat treatment”

M.A.HAQ, S.F.ABBAS, T.S.Kim, B.Lee, K.T.Park, B.S.Kim*,

Archives of Metallurgy and Materials, Vol. 63, No.3, pp.1427-1430, 2018.

DOI: 10.24425/123822

9.

“Fabrication and characterization of CoCrFeNiMn High entropy alloy powder processed by gas atomization”

Tae Gyu Park, Sang Hyun Lee, Bin Lee, Hye Mi Cho, Won Jung Choi, Bum Sung Kim, Kwang Seon Shin, Taek-soo Kim*,

Archives of Metallurgy and Materials, Vol. 63, No.2, pp.1055-1059, 2018.03

DOI: 10.24425/122442

8.

“Enhanced Capacitive Deionization by Dispersion of CNTs in Activated Carbon Electrode”

Bin Lee, Nam Soo Park, Kyung Suk Kang, Ho Jin Ryu, Soon H. Hong*,

ACS Sustainable Chemistry & Engineering, 6, pp.1572-1579, 2018.01

DOI: 10.1021/acssuschemeng.7b01750

7.

“Dilatometric analysis and microstructural investigation of the sintering mechanisms of blended elemental Ti-6Al-4V powders”

Youngmoo Kim, Junho Lee, Bin Lee, Hojin Ryu, Soon Hyung Hong*,

Metallurgical and Materials Transactions A, Vol. 47, Issue 9. Pp. 4616-4624, 2016.09

DOI: 10.1007/s11661-016-3607-3

6.

“Enhancement of toughness and wear resistance in boron nitride nanoplatelet (BNNP) reinforced Si3N4 nanocomposites”

Bin Lee, Donju Lee, Jun Ho Lee, Ho Jin, Ryu, Soon Hyung Hong*,

Scientific Reports, Vol. 6, 27609, 2016.06

DOI: 10.1038/srep27609

5.

“Fabrication of Al2O3/AlN micro-composites designed for tailored physical properties”

B. Lee, M. K. Kim (The first two authors contributed equally to this work), M. Y. Koo, H. J. Ryu, S. H. Hong*,

Materials & Design, Vol. 86, 5, pp. 1-5, 2015.12

DOI: 10.1016/j.matdes.2015.07.066

4.

“Simultaneous strengthening and toughening of reduced graphene oxide/alumina composites fabricated by molecular-level mixing process”

Bin Lee, Min Young Koo, Sung Hwan Jin, Kyung Tae Kim*, Soon H. Hong*,

Carbon, Vol. 78, pp.212-219, 2014.11

DOI: 10.1016/j.carbon.2014.06.074

3.

“Scalable Exfoliation Process for Highly Soluble Boron Nitride Nanoplatelets by Hydroxide-Assisted Ball Milling"

Dongju Lee, Bin Lee, Kwang Hyun Park, Ho Jin Ryu, Seokwoo Jeon* and Soon Hyung Hong*,

Nano Letters, Vol. 15 No.2, pp 1238–1244, 2015.01

DOI: 10.1021/nl504397h

2.

“Enhanced conduction and charge-selectivity by N-doped graphene flakes in the active layer of bulk-heterojunction organic solar cells"

Gwang Hoon Jun, Sung Hwan Jin, Bin Lee, Bo Hyun Kim, Weon-Sik Chae, Soon Hyung Hong*, and Seokwoo Jeon*,

Energy & Environmental Science, volume 6, pp.3000-3006, 2013.07

DOI: 10.1039/C3EE40963E

1.

“Salting-out as a scalable, in-series purification method of graphene oxides from microsheets to quantum dots"

Seongwoo Ryu, Bin Lee, Seonki Hong, Sunghwan Jin, Sungjin Park, Soon Hyung Hong*, Haeshin Lee*,

Carbon, volume 63, pp. 45-53, 2013.11

DOI: 10.1016/j.carbon.2013.06.037